HI12000

HI12000

$1,799.99

35 Series Adapter Kit Required *

PN: 35KIT

Compare
75-52000C. In stock

Description

The Mile Marker HI12000 Series Hydraulic winch is made to be permanently mounted in the front or rear of a vehicle and comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient installation. Utilizing the vehicle’s power steering system as its power source ensures the HI12000 will run continuously without draining the battery.

Completely element proof construction, corrosion and water resistant, the HI12000 features two speed, free spooling, mechanical lock, an integrated solenoid valve, a ductile iron body, stainless steel tie bars and fasteners, reversible mounting on 3 sides, 100’ of steel cable, 12,000 pounds of pulling capacity and includes an illuminated joystick remote control. Requires a vehicle specific 35 Series valve adapter kit to adapt to the vehicle’s power steering pump.

2 Speed
Mechanical Lock
Freespooling
Integrated Solenoid Valve
Fully Submersible
Corrosion Resistant
Stainless Steel Tie Bars and Fasteners
100 Feet Steel Cable
Reversible Mounting on 3 Sides
Ductile Iron Body
Power Steering Pump Powered
100% continuous Duty Cycle
Gear Train Planetary
Gear Ratio 6:1
Motor 19.5 Cubic Inch
Control Pendant Illuminated Joystick Remote, 12’
Cable 3/8” X 100’ (nominal 14,400 lbs) (9.53 mm X 30.5 m)
Dimensions 22.5″ X 7.8″
Drum Size 2.5” X 9” (63.5 mm X 228.6 mm)
Net weight 110 lbs (50 kgs)
Bolt Pattern 4 Bolt Pattern, 4.5” X 10”, (114.3 mm X 254 mm)
Power Steering
Min. Requirements
3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
Layer of Cable 1 2 3 4
Line speed-low gear (FPM) 5.65 6.43 7.41 8.58
Rated pull (lbs.) 12,000 9,400 8,200 7,000
Line speed-high gear (FPM) 31 36 42 48
Rated pull (lbs.) 2,000 1,550 1,350 1,150

Login

Lost your password?