H10500

H10500

$1,499.99

34 Series Adapter Kit Required *

PN: 34KIT

Compare
70-50050C. In stock

Description

The Mile Marker H10500 Series hydraulic winch is independent from its solenoid control valve to give more freedom in application and can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. Utilizing the vehicle’s power steering system as its power source allows the H10500 to run continuously without draining the battery.

Completely element proof construction, corrosion and water resistant, the H10500 features two speed spooling, a mechanical lock system, stainless steel tie bars and fasteners, 100’ of steel cable, 10,500 pounds of pulling capacity and requires a vehicle specific 34 Series valve adapter kit for installation and operation.

2 Speed
Freespooling
Mechanical Lock
Can Use Underwater
Corrosion Resistant
Stainless Steel Tie Bars and Fasteners
100 Feet Galvanized Aircraft Cable
Gear Train Planetary
Gear Ratio 6:1
Motor 17.9 cubic inch
Control Pendant Not Included, Requires 34 Series Kit
Cable 3/8” X 100’ (nominal 14,400 lbs) (9.53 mm X 30.5 m)
Drum Size 2.5” X 9” (63.5 mm X 228.6 mm)
Net weight 93 lbs (42.2 kgs)
Bolt Pattern 4 Bolt Pattern, 4.5” X 10”, (114.3 mm X 254 mm)
Power Steering Min. Requirements 3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)
3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
Layer of Cable 1 2 3 4
Line speed-low gear (FPM) 5.65 6.43 7.41 8.58
Rated pull (lbs.) 10,500 8,500 7,400 6,400
Line speed-high gear (FPM) 31 36 42 48
Rated pull (lbs.) 1,600 1,300 1,200 1,000

Login

Lost your password?